Tutorials specifically on how to install an ADT doorbell camera, utilize an ADT doorbell camera as a security camera, link an ADT doorbell camera to a smartphone, and uninstall an ADT doorbell camera abound.
There are a few easy procedures to take if you want your ADT doorbell camera deactivated, but it is already installed at your house. Depending on your degree of knowledge, disarming an ADT doorbell camera should usually take less than an hour. Following this tutorial will help you to properly remove your ADT doorbell camera and know the actions to conduct should it not be working as expected.
Before starting, there are certain crucial steps you must follow to properly remove the doorbell camera before beginning the removal process:
- A flathead and Phillips screwdriver
- Needle-nose pliers
- A power drill and assorted drill bits
- Ladder (if the camera is mounted at a certain height on the door frame)
- Goggles and gloves are worn for protection reasons
You will also want to find your primary circuit breaker and shut it off before attempting to remove the doorbell camera. This is a safety measure to ensure that one does not get an electric shock.
Step 1: First step, turn off the power and disconnect the doorbell wires. Eliminating the cables linking the doorbell button to the interior of the wall comes first. Attached to the rear of the doorbell button mechanism, two primary wires provide electricity from the doorbell transformer. Holding tightly on the wires, one by one, peel out these wires with the needle-nose pliers. Make sure the wires do not cross in a manner that, upon disconnecting, will result in a short circuit. If you still want a new doorbell someday, it is advised to hide the damaged and split wires with electrical tape.
Step 2: Take off the doorbell cover. You will take off the main cover that is located on the surface of the front door, where the doorbell button and the mechanism are situated. This usually involves the use of a Phillips head screwdriver to unscrew two tiny screws found at the top, as well as the bottom or sides of the doorbell cover. Remove screws and keep them separately to fix them again once the repair is complete. Gently remove the doorbell cover assembly and detach it from the doorbell baseplate that remains on the door. Be careful not to harm the cover when removing it.
Step 3: Pull wires out of the doorbell button and take out the doorbell button mechanism. After the removal of the cover, you will still notice that the main doorbell button mechanism remains fixed on the door frame. Generally, there are two long screws connecting the doorbell mechanism to the base, usually on the door. You can use a flat or Phillips head screwdriver to detach these screws. This will disengage the wired doorbell mechanism from the baseplate. It is important to avoid dropping the unit after these screws have been unscrewed.
Step 4: How to remove the baseplate from the door . The next step is to unbolt the b, which is still part of the front door. This usually has another two screws fixed from the back side of the plate towards the door side. You can then undo and take out these screws using your power drill or screwdriver carefully. You should then be able to pull out the whole doorbell base plate and get it off the door completely.
Step 5: Unmounting the Mounting Bracket. To complete the process of dismantling the rest of the doorbell system, take off the mounting bracket that you see on the wall close to the door frame; this may require the use of a power drill or screwdriver. These are the screws that the baseplate has so that it screws into them and secure the baseplate firmly. By removing the bracket, you will therefore be through with the process of removal.
Patch the Door and Wall Holes. After the removal of the doorbell and the mounting bracket, you may well be left with some holes in the door and wall. Sand it and properly paint over the holes using a wood filler and patching material if you don't plan to install a new doorbell camera soon. After washing and applying the patch, let it dry before rubbing the surface with sandpaper. Again, paint or finish to blend with the door and wall surface to cover any areas that might be damaged or worn out. Clean the area to get rid of dust and other dirt before hanging your front door again.
Pro Tip: Shut down the Chime Box. If your ADT doorbell camera is also accompanied by a wireless chime box within the home, you will have to take it apart and remove the wires or batteries that power it. This will also help to disable the indoor doorbell chime since the outside button and the camera have been eliminated.
You have now successfully disarmed an ADT doorbell camera from your home facade. It is just important that skilled care is used when disconnecting the wired connection and mounting brackets. It is important to cap or disable wires properly to avoid creating chances for electrical shorts or fire issues upon removal. If you follow these steps properly, you will be able to safely uninstall an ADT doorbell camera all by yourself without much trouble or cost.
Protect your home today with ADT’s top-rated security solutions!
Call now at +1 877-470-7879 to get a free consultation and find out how you can secure your home with the best in the business. Don’t wait—ensure your peace of mind with ADT!
FAQ: How To Remove ADT Doorbell Camera
Q1: How do I remove my ADT doorbell camera from the wall?
A: First, power off your ADT system, unscrew the mounting screws with a screwdriver, gently detach the doorbell camera, and disconnect the wiring.
Q2: Do I need to turn off power before removing the ADT doorbell camera?
A: Yes, always turn off the power supply to avoid electric shock or system damage before removal.
Q3: Can I remove an ADT doorbell camera without professional help?
A: Yes, most homeowners can remove it safely with basic tools, but professional removal is recommended if wiring is complex.
Q4: What tools do I need to remove an ADT doorbell camera?
A: You typically need a Phillips screwdriver, flathead screwdriver, and possibly a small wrench depending on the mounting bracket.
Q5: Will removing the ADT doorbell camera trigger an alarm?
A: It can, unless you disarm your ADT system before starting the removal process.
Q6: How do I disconnect the ADT doorbell from Wi-Fi?
A: Open the ADT Control app, navigate to settings, and remove the device from your connected devices list before uninstalling it physically.
Q7: Can I reinstall the ADT doorbell camera later?
A: Yes, you can reinstall it using the same mounting bracket or a new one, following ADT’s installation instructions.
Q8: What should I do with my old ADT doorbell camera after removal?
A: You can reuse it, recycle it properly, or return it to ADT if your contract requires equipment return.
Q9: How long does it take to remove an ADT doorbell camera?
A: Removal usually takes 10–20 minutes depending on wiring and mounting complexity.
Q10: Does removing my ADT doorbell camera cancel my monitoring service?
A: No, removing the device does not cancel your ADT subscription; you must contact ADT to make account changes.
